Fischer FIS V 300T Chemical epoxy injection mortar

$24.75 inc GST



  • The FIS V is a 2-component injection mortar based on vinyl ester.
  • Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
  • The injection cartridges are quick and easy to use with the fischer dispensers.
  • Partially used cartridges can be reused, simply by changing the static mixer.


  • The FIS V injection mortar has numerous system approvals, such as in cracked and non-cracked concrete, masonry and for special applications. FIS V is thus the universal injection mortar family with guaranteed reliability for practically all areas of application.
  • The extensive range of accessories is ideally suited to the FIS V injection mortar family, increases the great flexibility of the system and thus allows for a broad range of applications.


  • Threaded rods
  • Internal threaded anchor RG MI
  • Injection anchor sleeves FIS H
  • Rebar anchor
  • Aerated concrete centring sleeve PBZ
  • Remedial wall tie VBS 8
  • Anchorings in water filled drill holes (only FIS V 410 C).


  • Concrete C20/25 to C50/60, cracked and non-cracked
  • Hollow blocks made from lightweight concrete
  • Hollow blocks made from concrete
  • Vertically perforated brick
  • Perforated sand-lime brick
  • Solid sand-lime brick
  • Aerated concrete
  • Solid brick.

Also approved for:

  • Rebar connections
  • Remedial wall tie VBS 8
  • Weather facing reconstruction system FWS II
  • Stand-off installation Thermax.

FIS V – Injection Mortar

Share on facebook
Share on twitter
Share on linkedin
Share on email